PROGRESS IS OUR COMMITMENT
THE EARTH OUR CONCERN

CRC Industries Europe bvba
Touwslagerstraat 1
9240 Zele - Belgium
Tel (+32) (0) 52 / 45 60 11 - Fax (+32) (0) 52 / 45 00 34
Material Safety Data Sheet Regulation EC No 1907/2006 Art.31
Productname : FLEX SEAL Creationdate : 23.11.10
Ref.Nr.: AB18290-3-231110 Replaces: 16.04.10

1. IDENTIFICATION OF PRODUCT AND COMPANY   

 

Productname : FLEX SEAL
Aerosol

 

Application :

 Sealants and Isolation

 

Company :

 CRC Industries Europe bvba
Touwslagerstraat 1
9240 ZELE
Belgium
Tel.: (+32)(0)52/456011
Fax: (+32)(0)52/450034
E-mail : hse@crcind.com		  
In case of emergency : (+32) (0)52/45 60 11
  

Subsidiaries

 

Tel

Fax

CRC Industries Finland

Asemanrinne 13, 08500 Lohja AS

(+358)(0)19/32921

(+358)(0)19/383676

CRC Industries France

12, Bld des Martyrs de Chateaubriant F-95102 Argenteuil Cédex

(+33)(0)1/34112000

(+33)(0)1/34110996

CRC Industries Deutschland

Südring 9, 76473 Iffezheim

(+49)(0)7229/3030

(+49)(0)7229/303266

CRC Industries Iberia

Gremio del cuero S/N, 40195 Segovia

(+34)921/427546

(+34)921/436270

CRC Industries Sweden

Kryptongatan 14, 43153 Mölndal

(+46)(0)31/7068480

(+46)(0)31/273991

2. HAZARD IDENTIFICATION   

Health and Safety :

 Extremely Flammable
(propane/butane propellant)
Without adequate ventilation formation of explosive mixtures may be possible.

Other hazards :

 Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C.

3. COMPOSITION AND INFORMATION ON COMPONENTS   

Remark: in contact with humide air, acetic acid (CAS n° 64-19-7, C R10-35) is liberated
Hazardous ingredientCAS-nbr.EINECSw/w %symbolR-phrases*Notes
triacetoxyethylsilane17689-77-9241-677-4<5C34
methylsilanetriyl triacetate4253-34-3224-221-9<5C34
(* Explanation risk-phrases : see chapter 16)

4. FIRST AID MEASURES   

General Advice :

 The usual precautions for handling chemicals should be observed
If symptoms persist always call a doctor

Contact with eyes :

 If substance has got into eyes, immediately wash out with plenty of water
Seek medical advice

Contact with skin :

 Remove contaminated clothing immediately and wipe affected skin with dry cloth. Then wash with soap and water

Inhalation :

 Remove patient to fresh air
Seek medical advice

Ingestion :

 If swallowed accidentally, do not induce vomiting and seek medical advice.

5. FIRE-FIGHTING MEASURES   

Flash point (without propellant):

 > 100

Explosion limits : upper limit :

 Not available.

lower limit :

 Not available.

Extinguishing media :

 foam, carbon dioxide or dry agent

Fire-fighting procedures :

 Keep container(s) exposed to fire cool, by spraying with water

Unusual exposure hazard :

 Substance evolves toxic fumes, wear self-contained breathing apparatus
May form explosive vapour/air mixtures

6. ACCIDENTAL RELEASE MEASURES   

Personal precautions :

 Shut off all ignition sources
Ensure adequate ventilation
Wear suitable protective clothing and gloves.

Environmental precautions :

 Do not allow to enter public sewers and watercourses

Cleaning methods :

 Collect as much as possible in clean container for reuse or disposal
Remove by mechanical means
Absorb spillage in suitable inert material

7. HANDLING AND STORAGE    

Handling procedures :

 Use only in well ventilated areas
Keep away from heat and sources of ignition
Do not spray on a naked flame or incandescent material.
Do not pierce or burn aerosols, even after use.
Do not breathe aerosols or vapours.
Avoid contact with skin and eyes.
Eyewash bottles should be available

Storage procedures :

 Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C.
Keep in a cool, dry, well ventilated place
Keep out of reach of children.

8. EXPOSURE CONTROL AND PERSONAL PROTECTION   

Control procedures :

 Keep away from heat and sources of ignition

Personal protection :

 Take precautions to avoid contact with skin and eyes when handling the product.
Use only in well ventilated areas

inhalation :

 In case of insufficient ventilation, wear suitable respiratory equipment.
(Filter type AX)

hands and skin :

 Wear suitable protective gloves
(Plastic, Rubber)

eyes :

 Wear goggles giving complete eye protection

9. PHYSICAL AND CHEMICAL PROPERTIES (for aerosols without propellant)   

Apperance : physical state :

 Propane/butane propelled liquid.

colour :

 Black.

odour :

 Acetic acid.

Boiling point/range :

 Not available.

Relative density :

 1.09 g/cm3 (@ 25°C).

pH :

 Not applicable.

Vapour pressure :

 Not available.

Relative vapour density :

 Not available.

Solubility in water :

 Partly soluble in water

Flash point :

 > 100

Auto-ignition :

 > 200 °C

Viscosity :

 Not available.

Evaporation rate :

 Not available.

10. STABILITY AND REACTIVITY   

Materials to be avoided :

 May polymerise on exposure to air.
Strong oxidising agent
Decomposes in water

Hazardous decomposition compounds :

 Remark: in contact with humide air, acetic acid (CAS n° 64-19-7, C R10-35) is liberated
CO,CO2
traces of silice

11. TOXICOLOGICAL INFORMATION   

Inhalation :

 May cause irritation.

Skin contact :

 Mildly irritating to skin

Eye contact :

 Mildly irritating to eyes

12. ECOLOGICAL INFORMATION   

Do not allow to enter public sewers and watercourses

13. WASTE DISPOSAL   

Product :

 Do not discharge into drains or the environment, dispose to an authorised waste collection point.

National regulations :

 Disposal should be in accordance with local, state or national legislation

14. TRANSPORT   

UN-number :

 1950

Road/Rail - ADR/RID :

 UN1950 Aerosols Class : 2, PG : NA, Class code : 5F, Label : 2.1, Tunnel-code : (D)

Sea - IMDG :

 UN1950 Aerosols Class : 2, PG : NA, Label : 2.1
 

EmS

 F-D, S-U

Air - IATA/ICAO :

 UN1950 Aerosols, flammable Class : 2, PG : NA, Label : 2.1
 
 
 

15. REGULATORY INFORMATION   

Warning symbol(s) :

 F+ : EXTREMELY FLAMMABLE

Risk-phrase(s) :

 R12: Extremely flammable.

Safety-phrase(s) :

 S2: Keep out of the reach of children.
S16: Keep away from sources of ignition - No smoking.
S23: Do not breathe vapours/spray.
S51: Use only in well-ventilated areas.
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Do not spray on a naked flame or any incandescent material. Without adequate ventilation formation of explosive mixtures may be possible.
Classified according to Dir. 2008/47/EC amendment of the aerosol dispenser directive 75/324/EEC.
Classification according to EU-directive 99/45/EC

16. OTHER INFORMATION   

This product should be stored, handled and used in accordance with good industrial hygiene practices and in conformity with any legal regulation.
The information contained herewith is based on the present state of our knowledge and is intended to describe our products from the point of view of safety requirements. It does not guarantee any specific properties.
Apart from any fair dealing for purposes of study, research and review of health, safety and environmental risks, no part of these documents may be reproduced by any process without written permission from CRC.

REVISIONS IN CHAPTRE :

 14

*Explanation risk-phrases:

 R34: Causes burns.

 

This Material Safety Data Sheet may already have been revised at this moment for reason such as legislation, availability of components and newly acquired experiences. The latest and only valid version of this Material Safety Data Sheet will be sent to you upon simple request or can be found on our website : www.crcind.com. We recommend you to register on this website for this product so you will be able to receive any future updated version automatically.